The Brakes needed adjusting, the right brake front return spring was missing. We see the new one here
The lift arm latches need some attention, the piece that anchors the springs is broken off on both
With new springs and anchor tubes they are ready for service again
I replaced the Hydraulic control rod with the one from the parts tractor
because it could not be adjusted to work properly.
Not sure why but at least an inch had been cut off the original
The bottom of the left side loader mount was broken across the bottom and needed welding
All new hoses and Tee fitting for the loader, not leaking anymore
The right side upright on the loader bucket was broken several inches back and bent in badly
I straightened it and welded it inside and out
Seen from above it turned out fairly straight
